Installing the firmware
=========================
- Copy all firmware files (*.img,*.sig,*.txt) to an SD card (FAT32 formatting)
- In IP touch go to the menu "System settings"/"About" to "Firmware update" to start firmware update

NOTE
This IP touch 7 or 10 supports the following SD card type:
■ Type: Micro SDHC
■ Capacity: 4...32 G
■ Speed: Class10
■ File system: FAT32
■ Use a card that complies with the SDHC standard. Some
cards may not function properly. It is
recommended to use SDHC cards from SanDisk, Kingston, and Transcend.
that have been fully tested and verified.


######################################################################################################
######################################################################################################
######################################################################################################


Installation der Firmware
=========================
- Kopieren Sie alle Firmware Dateien (*.img,*.sig,*.txt) auf eine SD-Karte (FAT32 Formatierung)
- Im IP touch gehen Sie in das Menü "Systemeinstellungen"/"Über" auf "Firmware-Update", um die Firmware Aktualisierung zu starten


HINWEIS
Diese Innenstation unterstützt folgenden SD-Kartentyp:
■ Typ: Micro SDHC
■ Kapazität: 4...32 G
■ Geschwindigkeit: Klasse10
■ Dateisystem: FAT32
■ Verwenden Sie eine Karte, die dem SDHC-Standard entspricht. Einige
Karten funktionieren möglicherweise nicht ordnungsgemäß. Es wird
empfohlen, SDHC-Karten von SanDisk, Kingston und Transcend zu
verwenden, die vollständig getestet und überprüft wurden.