Zublin_ETS-DB_readme.txt
2.12.2016/cfs 

KNX-FW revision vs ETS-ProductData for Niko-Zublin KNX Presence-Detectors
*************************************************************************
SG: SwissGarde, P: Presence, KLR: ConstantLightControl, FW: Firmware

ArtNo      Product               #PIR  FW-Rev       Prod.Code*           ETS-DB file
--------------------------------------------------------------------------------------------------------
25010      SG Hokuspokus KNX/KLR   2   v2.4 to 2.6  xxxDxxx to xxxFxxx   25010_Hokuspokus_Magic_KLR_v24_DB_11-2014.vd4    
25010      SG Hokuspokus KNX/KLR   2   v2.7 and >   xxxGxxx and greater  25010_Hokuspokus_Magic_KLR_v27_DB_10-2016.vd4  

25020n     SG360P KNX UP           4   v2.2 and >   xxxBxxx to xxxCxxx   25020N_SG360_4PIR_v23_DB_10-2016.vd4
25030      SG360P KNX/KLR UP       4   v2.2 and >   xxxBxxx and greater  25030_SG360_4PIR_KLR_v23_DB_10-2016.vd4

25032to37  SG360P KNX/KLR          3   v2.4 to 2.6  xxxDxxx to xxxFxxx   25032_to_25037_SG360P_KLR_v24_DB_11-2014.vd4  
25032to37  SG360P KNX/KLR          3   v2.7 and >   xxxGxxx and greater  25032_to_25037_SG360_3PIR_KLR_v27_DB_10-2016.vd4

25038to39  SG360P KNX/KLR 4-CH     4   v2.4 to 2.6  xxxDxxx to xxxFxxx   25038_SG360P_KLR_4CH_v24_DB_11-2014.vd4  
25038to39  SG360P KNX/KLR 4-CH     4   v2.7 and >   xxxGxxx and greater  25038_SG360_4PIR_KLR_v27_DB_10-2016.vd4

25240to49  SG300P KNX/KLR          3   v2.4 to 2.6  xxxDxxx to xxxFxxx   25240_to_25249_SG300P_KLR_v24_DB_11-2014.vd4
25240to49  SG300P KNX/KLR          3   v2.7 and >   xxxGxxx and greater  25240_to_25249_SG300_3PIR_KLR_v27_DB_10-2016.vd4

Remark: 
- ETS-DB v2.4 and v2.7 are downwards compatible 
- for full functionality use/replace the ETS-DB that match FW-Rev, as listed above
- after installation/replacement is recommendet to calibrate the brightness value with ETS (see Application Description)  

*ProductionCode is beside the TypePlate on a small silver-white label. 
Examples (Prod.Code allways with 7 characters): 
46EF032 => xxxFxxx, F means FW-v2.6
03FH010 => xxxHxxx, H means FW-v2.8
C = v2.3; D = v2.4; E = v2.5; F = v2.6; 
G = v2.7; H = v2.8; I = v2.9; J = v3.0;

#end of file   		   