Enertex MeTa² KNX 
-------------------------------
2.015 (2024-09-25):
   * New:
     - The cooling comfort temperature is independent of the heating setpoint adjustment when in independent setpoint shifting mode.
     - Information display for the controller mode (Requires ETS App > 2.2)
     
   * Fixes 
     - booting problems
     - When "None" is selected for the left function in the single-button operation, no label is displayed for the right function anymore.
     - The comfort temperature limit is active even with independent setpoint adjustment. The value is displayed on the rocker but is not sent to the bus.
     - If the controller is neither heating nor cooling, the icon will disapear
     - The single-button operation of the value adjuster on the right button doesnot work
     - Wake up Display, if Alarm is incoming
     - Changing information display on the premium display shows the Enertex logo only on the first cycle.
     - Debounce the button switch (switching channel).
     - For blinds (only standard function for scalable icons) and shutters (for scalable icons), the control icons are displayed incorrectly.
     - If "None" is selected for the left function in single-button operation and the information display is selected, the information display is not shown.
     - Window contact control fails when there is no automatic switching between heating and cooling of Two-point controller.
     - Two-point controller switching manually is incorrect.
     - Two-point controller switching automatically is incorrect.

2.014 (2024-08-09):
   * New:
      
   * Fixes 
     - booting problems 

2.013 (2024-08-08):
   * New:
     - Initial production Firmware      
